|
Hobart Airforce 500534 250ci Light Weight Plasma Cutter with Air Compressor |  | Brand: Hobart
Category: Home Improvement
Department: gift_store_main
List Price: $1,099.00
Buy New: $799.99
as of 9/6/2010 22:17 EDT details
You Save: $299.01 (27%)
New (3) Refurbished (1) from $649.99
Seller: Amazon.com
Rating:  6 reviews
Sales Rank: 32686
Media: Tools & Hardware
Number Of Items: 1
Shipping Weight (lbs): 0.3
Dimensions (in): 18.4 x 16.8 x 11
MPN: 500534A
UPC: 715959372183
EAN: 0715959372183
ASIN: B000R8UN6G
Availability: Usually ships in 24 hours
| |
| Features:
| • | Hobart AirForce 250ci lightweight plasma cutter with air compressor, powered by standard household current | | • | Designed to cut up to 1/4-inch mild steel; uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals | | • | Use it for a more precise cut, thinner kerf, and less slag to clean up with faster cuts than oxy fuel | | • | Includes 16.5-foot heavy duty work clamp, 7 -foot power cord with 115 VAC plug, extra replacement tips, and a convenient cable management strap | | • | 10-by-7-1/2-by-13-inches at 27-pounds; backed by Hobart limited warranty |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
The new AirForce 250CI plasma cutter with built-in air compressor features a new lightweight design that is both lightweight and powerful. Built-in compressor for total portability and low system cost. Cuts mild steel up to 1/4in. thick using standard household current. New HP-25 torch is more comfortable, efficient and economical. U.S.A. Cutting Thickness (in.): Up to 1/4, depending on material, Volts: 115, Amps: 20, Duty Cycle: 35% @ 12 Amps, 110 Volts DC, Pilot Arc: Yes, Plasma Gas Flow/Pressure: Preset with built-in compressor, Clamp Cable Length (ft.): 16, Power Cord (ft.): 7, Cart: No, Dimensions L x W x H (in.): 7 1/2 x 13 x 10
|
| Customer Reviews:
Showing reviews 1-5 of 6
 Cuts 1/8 inch steel like butter! July 24, 2010
hobbybuilder44
Bought refurbished model from Toolking and am very happy. Arrived promptly in like new shape. Cuts very well on smaller stock like 1/8 inch. Lag time for tip cooling after cut but very functional for the price and what I use it for. Would buy again or recomend for fellow hobby builder.
 Why pay more? April 5, 2010
jake thomas
0 out of 7 found this review helpful
I am also a DYI hobby cutter/welder. I have worked on cars and bikes using tig and naturally plasma and OXY cutting tools for year. When my old machine finally died I decided to look for a compact replacement plasma cutting tool. I looked at many brands, of course the usually suspects first; Hobart, Miller, etc. I researched on the internet extensively and it seemed for the most part Ramsond got pretty good reviews. So, I gave it a try and must say I was pleasantly suprised. I have used the Ramsond CUT50DY for almost a year. The machine has worked flawlessly. It cuts very smooth and I have had no problem cutting 1/2" steel pipes. The service from the company has been very smooth as well. The machine did take a bad tumble from the top of my garage tool rack and was damaged badly; the knob got pushed in. I did send it in to a service center in Detroit. It was repaired and in less than two weeks I got it back in perfect working order. The only issue that I have is that the only service center was in Detroit. However, the machine is lightweight so it was easy to ship it. I would certainly recommend this product.
Ended up buying a Ramsond CUT50DY instead April 4, 2010
Terrance Yule (Memphis USA)
0 out of 7 found this review helpful
I had used this item althought never purchased it. I don't know much about its quality, but for about half the price you can buy a Ramsond CUT50DY 50 Amp plasma cutter which is more powerful, great quality and does the same thing, if not more.
Amateur Car Restorer March 28, 2010
Brian R (Reading, Pa)
1 out of 1 found this review helpful
I bought this Plasma cutter for cutting sheet metal and various Rusty parts off my 76 Trans Am and I must say for the size of this little box and the cost, I'm very impressed. The unit is like they say plug in and play. I found it very easy to fit into my Hobart upright cart along with my Hobart Handler 140 (also an awesome welder) so if you're concerned about size, don't be, it's about the size of 2 six packs. Key features I like about it are that I don't need to use my air compressor on it, it has one built in. This way I don't have to adjust the regulator or any. Also, it only throws sparks about 1-2ft, I've heard horror stories of Plasma cutters throwing sparks for 4-6ft. I'm working in a small one car garage and I don't like having to worry about fires and such when working. Now as for cutting depth. The book states it can do 1/4in thick steel. I believe if you have perfect conditions it can do this with a pass or two. I have found in my own experience that it will at least cut 1/8th to 3/16th. (I had to cut off my rear frame off my car and it worked great.) And as for 20-22gauge steel, it'll cut through that like butter.
Now the cons, he ground cable isn't very flexible. It seems almost as if it were solid wire instead of stranded. I'm comparing this to my welder's ground cable and it is much more flexible. Another con is that I'm not very good at it so it keeps turning on and off and when it turns off you have to wait for the compressor to refill (3-5sec) before you can start again. Not a huge con but annoying if impatience is a character trait. It does however run rather quiet, I can talk over the sound of the compressor. Other than that I can't really thing of other draw backs. They do come with a 3 year warranty from Hobart, I called hobart up and I talked to one of their repair technitions and he said he barely ever gets plasma cutters in, they mostly get welders that have been on the job site for 10-15 years. So I do agree that hobart is an AWESOME BRAND. So I my point with that is don't be afraid to purchase one used for a couple bucks less. It's worth it! I guess that about wraps it up.
Final Notes: I would recommend this to a friend for medium to light duty cutting. I would not recommend this to a daily use shop. I would suggest a size a bigger than this.
Biggest Con: Ground Cable flexibility
Biggest Pro: Aircompressor built in and uses 115v 20amp circuit.
Low Power - Useless Piece of Junk July 19, 2009
Tim Daycounter
5 out of 6 found this review helpful
I was greatly disapointed with this. I had difficulty cutting even 14 gauge steel. I had to go extreemly slow, and got a very sloppy cut, because the power was so slow. It came with a extreemly cheap tip guide, made of a piece of bended wire. This kept rotating as it passed along my straight edge, causing further frustration. [...] I guess you just expect more.
I wouldn't recommend buying this to any person, for any application.
Showing reviews 1-5 of 6
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
| |
